Deltaplus Quartz UP14 VENTILATED SAFETY HELMET – ROTOR ADJUSTMENT White

Adjustable ventilation

Optimised ventilation

One-D Rotor ergonomic clamping system

One-handed adjustment with or without gloves

 

2 positions of the high and low head circumference

EN INDUSTRIAL SAFETY HELMETS- QUARTZ I: SAFETY HELMET MANUAL ADJUSTMENT QUARTZ UP IV: VENTILATED SAFETY HELMET – ROTOR ADJUSTMENT Use instructions: Industrial safety helmets are intended primarily to provide protection to the wearer against falling objects and consequential brain injury and skull fracture. For adequate protection this helmet must fit or be adjusted to the size of the user’s head. The helmet is made so that the energy released after a shock is absorbed by partial destruction or damage of the cap and harness, even if such damage is not immediately noticed, it is recommended to replace any helmet having being subject to a strong shock. We should draw the users’ attention also on the eventual hazard of modifying or removing one of the original parts of the protective helmet, except for the modification and removal type recommended by the helmet manufacturer. Helmets should not be adapted in any case for setting accessories according to a procedure not recommended by the helmet manufacturer. In order to ensure effective protection, this helmet must be worn with its peak forward and sit in straight position. It must be adjusted to the size of the user’s head (neither too tight nor too loose). Adjustable from 53 to 63 cm head circumference. Manual adjustment system: slide and fit to the right size. ACCESSORIES AND SPARE PARTS: The accessories and/ or spare parts (sweatband, harness parts, chin strap, hearing protection shell etc. …), when available, are delivered with installation instructions. Usage limits: The product’s useful life is affected by many factors including the cold, heat, chemicals, sunlight und misuse. Daily and before any use a check must be performed in order to identify any sign of rendering (cracks, flaws) the helmet, its harness and accessories fragile. Any helmet having been subject to a strong shock or having wear signs must be replaced. If it has no defaults, it is therefore proper for the intended use. The manufacturing date is marked inside each helmet. Under normal usage conditions, this protective helmet must provide proper protection for 2 up to 3 years after the first usage, or 5 years according to the manufacturing date. This item does not include any substance known to be susceptible of causing allergies. However if a sensitive person has an allergic reaction, it must therefore leave the hazardous area, remove the helmet and ask for medical advice. Only use accessories provided by DELTA PLUS. Storage/Cleaning instructions: This protective helmet may be cleaned and disinfected by means of a cloth impregnated in a low concentration cleaning solution. One shall not use any abrasive or corrosive chemical product. If this helmet cannot be cleaned by using this method, it must be replaced. Do not apply paint, solvents, adhesives or self-adhesive labels, except in accordance with instructions from manufacturer. The product must be transported in a its packaging unit. If there is no packaging unit, use packaging that protects the product from shock, exposure to moisture, thermal hazards, exposure to light, and holds it away from any product or material or substance that can deteriorate it. When not in use or during transportation, the product must be stored in a dry cool place away from light, frost and in a location granting that no chemical product or sharp object bends it by falling above.